Specification
Input Characteristic
-
Operating Input Range :
140VAC - 300VAC.
-
Input Frequency :
50Hz
-
Input Current :
< 600mA rms @ 140VAC
-
Efficiency :
> 75% under maximum load @ 230VAC.
-
Inrush Current :
< 30A Peak @ 230VAC Cold start at 25 Deg.
-
No Load Power :
< 0.5W at 230VAC input.
Output Characteristic
- Output Voltage
15.0 VDC
- Output Current
2.0A
- Line & Load Regulation
< +/- 5%
- Ripple
< 150mV
- Noise
< 300mV (measured with 0.1µF ceramic disc & 10µF Electrolytic capacitor across output)
- Output Over Current
< 3.5A Max @ 230VC
- Hold up Time
> 5 mSec at Full load 100VAC input.
> 20mSec at Full load 230VAC input - Turn-on Delay
< 1.0 Sec.
- Rise Time
< 20 mSec
01 Protections+
Output over Load and Short ckt Protection
Available
02 Environment+
Temperature
Operation Ambient 0ºC to +45ºC
Storage -15ºC to +70ºC ambient.
Humidity
Operating 10% RH to 95% RH non-condensing.
Storage 10% RH to 95% RH non-condensing.
03 Product Safety+
DI-Electric Voltage Withstand Test
3.0KVAC rms, 50Hz INPUT and Shorted OUTPUT Terminals.
Insulation Resistance
When tested with a 500VDC Megger, I.R should be > 100 M Ohms Between Shorted INPUT and Shorted OUTPUT Terminals.
Earth Ground Resistance
The leakage current shall be < 0.25mA for Class II equipment when the power supply is operated at 300VAC input volatge.
04Reliability & Quality+
All semiconductors junction temperature shall not exceeded the manufacturer's maximum thermal rating.
05EMI / EMC +
Surge Immunity
As per Test standard IEC61000 - 4 - 5
Test Level 3: +/- 2KV in Differential Mode1
Electrical Fasttransients
As per Test standard IEC61000 - 4 - 4
Test Level 3: 2KV
ESD
As per Test standard IEC61000 - 4 - 2
Test Level 2: Air discharge : 6KV
Test Level 2: Contact Discharge : 4KV
06 Terminations +
AC Input
AC input through 3-Pin intigrated Indian standard Plug PlasticMoulded Earth Pin.
DC Output
DC Cable 17 Strands/38Swg Gauge wire of 1.5 Mtrs. Length. with 2.5X5.5mm L-Type Locking pin Connector.
07 Indications +
RED LED Provided to Indicate Adaptor O/P ON
08 Enclosure +
Dimensions
L = 95.2 mm. W = 52.2 mm. H = 49.7 mm
Material
ABS JET Black Plastic.
AC PIN Material
L & N Brass with Nickel plated. E - Plastic moulded earth Pin.
Weight
150Grams under packed condition
